Gateron G Pro 2.0 Yellow Linear Switches:
- PCB mounted design (3 pins)
- Pre-travel: 2.0 ±0.6 mm
- Total travel：4.0 mm Max.
- Operating: 50 ±15 gf
- Bottom: 67g
- Spring Length: 15.4mm
The G Pro 2.0 switches upgraded their mold from the original G Pro Series and offer an RGB SMD condenser, which is renowned for its dynamic lighting effect and tactile typing experience. The 3-Pin switches are compatible with any 3-Pin/5-Pin MX mechanical keyboard with underflow SMD-LED light, or RGB-SMD lights, which allows you to pick from a wide variety of available keyboards.
Reduced Spring Noises
This self-lubricating mechanical switch with a 3-Pin mount not only has a reduced spring noise and less stem wobbliness but also its anti-oxidation alloy contacts ensure a longer switch lifespan.
Better Backlight Transmission
The light opening on the upper housing has a light-concentrating spot and light-guiding column to make the whole switch look crystal clear and provides better light performance to the typist and gamer.
Pre-lubed And Smooth
The switch is lubed before leaving the factory to increase the smoothness of the switch. If you want to try out the linear, tactile and clicky typing feel, then the Gateron G Switch is a must-have.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Gateron G Pro 2.0 Yellow Linear Switches:
- PCB mounted design (3 pins)
- Pre-travel: 2.0 ±0.6 mm
- Total travel：4.0 mm Max.
- Operating: 50 ±15 gf
- Bottom: 67g
- Spring Length: 15.4mm
The G Pro 2.0 switches upgraded their mold from the original G Pro Series and offer an RGB SMD condenser, which is renowned for its dynamic lighting effect and tactile typing experience. The 3-Pin switches are compatible with any 3-Pin/5-Pin MX mechanical keyboard with underflow SMD-LED light, or RGB-SMD lights, which allows you to pick from a wide variety of available keyboards.
Reduced Spring Noises
This self-lubricating mechanical switch with a 3-Pin mount not only has a reduced spring noise and less stem wobbliness but also its anti-oxidation alloy contacts ensure a longer switch lifespan.
Better Backlight Transmission
The light opening on the upper housing has a light-concentrating spot and light-guiding column to make the whole switch look crystal clear and provides better light performance to the typist and gamer.
Pre-lubed And Smooth
The switch is lubed before leaving the factory to increase the smoothness of the switch. If you want to try out the linear, tactile and clicky typing feel, then the Gateron G Switch is a must-have.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Looking for manuals, firmware or software files?
FInd them over in our download center!
