Note: All NEO65 Units are only available in Tri-mode PCB
Specs
- Typing angle:8 degree
- Front height:17mm
- Size:310.35mm * 107.8mm
-
Weight:
- Before build:0.97kg
- After build:1.32KG
-
PCB Specs
- 1.6mm
- All PCBs are QMK-based, VIA supported
- Three PCB options:
-
Tri-mode Hotswap
- Support wired, Bluetooth, and 2.4GHz connection
- Support both ANSI and ISO layout
- NKRO
- Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
-
Tri-mode Hotswap
Firmware & Resources (Click Here)
Package Contents
- Case
- Including selected weight pre-installed
- Two pre-installed 2200mAh batteries for Tri-Mode PCBs
- Fillers for battery compartment for Wired PCBs
- PCB Kit
- PCB of your choice
- PE Sheet
- PCB Foam
- Standoffs
- 2.4GHz dongle for Tri Mode PCB
- Plate
- Poron Case Foam
- Daughterboard and Cable
- Silicone Gaskets
- O-Ring (50 Duro)
- Rubber Feet in Grey and Black
- Weight Screws in Silver and Black
- Free Gifts (Not covered if damaged or missing)
- Carrying Case
- Hex Screwdriver
- Phillips Screwdriver
- Keycap and Switch Puller
- 1 Set of 65% PCB Clip-in NeoStabs
- USB-C Cable
Further notes and instructions:
- Oxidation of brass and copper weights is unavoidable due to the characteristics of these materials. If you are concerned about this, please choose the PVD stainless steel weight instead.
- Chroma and Dusk are random mixes of gradients, so the result on each unit may vary.
- The tri-mode PCB on this sale page comes with a pair of 2200mAh batteries
- All PCBs are QMK-based and support VIA.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Note: All NEO65 Units are only available in Tri-mode PCB
Specs
- Typing angle:8 degree
- Front height:17mm
- Size:310.35mm * 107.8mm
-
Weight:
- Before build:0.97kg
- After build:1.32KG
-
PCB Specs
- 1.6mm
- All PCBs are QMK-based, VIA supported
- Three PCB options:
-
Tri-mode Hotswap
- Support wired, Bluetooth, and 2.4GHz connection
- Support both ANSI and ISO layout
- NKRO
- Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
-
Tri-mode Hotswap
Firmware & Resources (Click Here)
Package Contents
- Case
- Including selected weight pre-installed
- Two pre-installed 2200mAh batteries for Tri-Mode PCBs
- Fillers for battery compartment for Wired PCBs
- PCB Kit
- PCB of your choice
- PE Sheet
- PCB Foam
- Standoffs
- 2.4GHz dongle for Tri Mode PCB
- Plate
- Poron Case Foam
- Daughterboard and Cable
- Silicone Gaskets
- O-Ring (50 Duro)
- Rubber Feet in Grey and Black
- Weight Screws in Silver and Black
- Free Gifts (Not covered if damaged or missing)
- Carrying Case
- Hex Screwdriver
- Phillips Screwdriver
- Keycap and Switch Puller
- 1 Set of 65% PCB Clip-in NeoStabs
- USB-C Cable
Further notes and instructions:
- Oxidation of brass and copper weights is unavoidable due to the characteristics of these materials. If you are concerned about this, please choose the PVD stainless steel weight instead.
- Chroma and Dusk are random mixes of gradients, so the result on each unit may vary.
- The tri-mode PCB on this sale page comes with a pair of 2200mAh batteries
- All PCBs are QMK-based and support VIA.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Looking for manuals, firmware or software files?
FInd them over in our download center!