Please read before purchasing
Note: All NEO ERGO Extra Units are only available in Tri-mode PCB + PP Plate, comes bundled without Acrylic Wrists Rest
Resource files & guide can be found here: https://qwertykeys.notion.site/Neo-Ergo-Build-Guide
-
Case (Top + Bottom + Kernel + Weight)
- Including one pre-installed external weight
- Including one pre-installed kernel
- Two 2200 mAh batteries will be installed inside of the kernel part for orders with Tri-mode PCBs
-
PCB kit
- Tri-mode PCB with 2.4Ghz Dongle
- 1x PE sheet
- 1x PCB Foam
- Plate
- Poron case foam
- PCB Daughterboard and magnetic connectors - pre-installed
- Gaskets
- Rubber feet
- LED diffusers
- 4 Case corner protectors - installed
- Acrylic / Wooden Wrists Rest (need add ons)
-
Free Gifts (Disclaimer: If one of these gifts is missing or is damaged, they will not be replaced):
- Keyboard carrying case
- 1x Keycap & Switch puller
- 1 set of PCB clip-in NeoStab
- USB-C cable
Supported Layout:
IIf you are unsure about keycap compatibility, please WhatsApp or WebChat us to check for you :)
❗ Due to the ergonomic shape of the wrist rest, a significant amount of cutting and manual polishing is required. As a result, they cannot be completely flat like aluminum. We recommend using it on a desk mat. Alternatively, you can also attach larger anti-slip pads to the back of the wrist rest to increase the contact area.
The acrylic wrist rests have undergone manual polishing, so minor scratches, slight unevenness, and a few impurities are inevitable and therefore not covered under after-sales service. The quality control standard is that under natural light and within a viewing distance of 30cm, no obvious defects should be visible.
If the acrylic wrist rest gets dirty, please clean it with water. Avoid using alcohol on acrylic products.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Please read before purchasing
Note: All NEO ERGO Extra Units are only available in Tri-mode PCB + PP Plate, comes bundled without Acrylic Wrists Rest
Resource files & guide can be found here: https://qwertykeys.notion.site/Neo-Ergo-Build-Guide
-
Case (Top + Bottom + Kernel + Weight)
- Including one pre-installed external weight
- Including one pre-installed kernel
- Two 2200 mAh batteries will be installed inside of the kernel part for orders with Tri-mode PCBs
-
PCB kit
- Tri-mode PCB with 2.4Ghz Dongle
- 1x PE sheet
- 1x PCB Foam
- Plate
- Poron case foam
- PCB Daughterboard and magnetic connectors - pre-installed
- Gaskets
- Rubber feet
- LED diffusers
- 4 Case corner protectors - installed
- Acrylic / Wooden Wrists Rest (need add ons)
-
Free Gifts (Disclaimer: If one of these gifts is missing or is damaged, they will not be replaced):
- Keyboard carrying case
- 1x Keycap & Switch puller
- 1 set of PCB clip-in NeoStab
- USB-C cable
Supported Layout:
IIf you are unsure about keycap compatibility, please WhatsApp or WebChat us to check for you :)
❗ Due to the ergonomic shape of the wrist rest, a significant amount of cutting and manual polishing is required. As a result, they cannot be completely flat like aluminum. We recommend using it on a desk mat. Alternatively, you can also attach larger anti-slip pads to the back of the wrist rest to increase the contact area.
The acrylic wrist rests have undergone manual polishing, so minor scratches, slight unevenness, and a few impurities are inevitable and therefore not covered under after-sales service. The quality control standard is that under natural light and within a viewing distance of 30cm, no obvious defects should be visible.
If the acrylic wrist rest gets dirty, please clean it with water. Avoid using alcohol on acrylic products.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Looking for manuals, firmware or software files?
FInd them over in our download center!
